Volume 16 Preprint 64


Carum copticum as an ecofriendly inhibitor for Steel corrosion in 1 M Tartaric acid.

ALKA SINGH* and KALPANA S.

Keywords: Corrosion, inhibitors, Steel, Carum copticum, Freundlich adsorption isotherm.

Abstract:
Steel has been widely used in many industries in handling acidic , alkaline and salt solution. Acids are used especially for cleaning, pickling and descaling [1]. Aqueous solutions of acids are among the most corrosive media. There is a great need to protect steel from dissolution by using corrosion inhibitors. The inhibitive properties of corrosion inhibitors are due to their ability to adsorb on to the electrode surface [2]. Most acid corrosion inhibitors are nitrogen, oxygen and / or sulphur containing organic compounds [3,4]. The main aim of this paper is to study the anticorrosive effect of aqueous extract of Carum copticum seeds (AECCS) on the steel corrosion in 1 M Tartaric acid solutions by using weight loss methods. Carum copticum seeds contains a volatile oil in which Thymol, γ-Terpinene, p- Cymene, β- Pinene, α – Pinene and Limonene are present [5].

Because you are not logged-in to the journal, it is now our policy to display a 'text-only' version of the preprint. This version is obtained by extracting the text from the PDF or HTML file, and it is not guaranteed that the text will be a true image of the text of the paper. The text-only version is intended to act as a reference for search engines when they index the site, and it is not designed to be read by humans!

If you wish to view the human-readable version of the preprint, then please Register (if you have not already done so) and Login. Registration is completely free.

ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 Carum copticum as an ecofriendly inhibitor for Steel corrosion in 1 M Tartaric acid. ALKA SINGH* and KALPANA S. Electrochemistry and Environmental Chemistry Laboratory Department of Chemistry, Government College, Kota (Rajasthan) India. maurya4124@gmail.com anushrishri@gmail.com 1. Abstract : The influence of a natural aqueous extract of Carum copticum seeds (AECCS) on the corrosion of steel in 1 M Tartaric acid has been studied by weight loss methods. The maximium inhibition efficiency (63.64%) was found at 10% v/v, concentration of inhibitor at 303 K. The effectiveness of the inhibitor increased with the increase in inhibitor concentration. Kinetic and thermodynamic parameters were calculated using Arrhenius equation. Adsorption of the inhibitor on steel surface followed Freundlich adsorption isotherm. 2. Keywords : Corrosion, inhibitors, Steel, Carum copticum, Freundlich adsorption isotherm. 3. Introduction Steel has been widely used in many industries in handling acidic , alkaline and salt solution. Acids are used especially for cleaning, pickling and descaling [1]. Aqueous solutions of acids are among the most corrosive media. There is a great need to protect steel from dissolution by using corrosion inhibitors. The inhibitive properties of corrosion inhibitors are due to their ability to adsorb on to the electrode surface [2]. Most acid corrosion inhibitors are nitrogen, oxygen and / or sulphur containing organic compounds [3,4]. The main aim of this paper is to study the anticorrosive effect of aqueous extract of Carum copticum seeds (AECCS) on the steel corrosion in 1 M Tartaric acid solutions by using weight loss methods. Carum copticum seeds contains a volatile oil in which Thymol, γ-Terpinene, p- Cymene, β- Pinene, α – Pinene and Limonene are present [5]. 4. Materials & Methodology Carum copticum seeds were purchased from a local herbal store in Kota. ‘R.A. 1-80’ variety of Carum copticum was taken for experimental purpose. © 2013 University of Manchester and the authors. This is a preprint1of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 4.1 Preparation of AECCS Stock solution of AECCS was prepared by boiling 20 g of dried gounded Carum copticum seeds in 250 ml of deionized water for 1 hour with an air condenser 1 meter high under low heat. The extract was left over night and then filtered and completed to 250ml by de-ionized water. 4.2 Preparation of aggressive solutions used The aggressive solutions used were made of AR grade Tartaric acid (E Merck).Standard stock solution of Tartaric acid (1 M) was prepared using de-ionized water. 4.3 Determination of weight loss A gravimetric technique for weight loss described by Mattsson [6] was adopted to measure the corrosion rates of the specimens. For the weight loss determination, cylindrical steel specimen of 5cm (± 0.02) in length and 1.2 cm in diameter were taken. These specimens were abraded with a series of emery paper then degreased with acetone, washed thoroughly with doubly distilled water and finally dried in hot air for recording their constant weight (m1) in an electronic balance Citizen model CY 204. Stock solution of aqueous extract of Carum copticum seeds was prepared by boiling 20g of dried grounded Carum copticum seeds in 250ml of de-ionized water for 1 hour with an air condenser 1meter high at low flame. The extract was left over night and then filtered and completed to 1000 ml by de-ionized water. 1M Tartaric acid solutions were used as aggressive solution. The polished specimens were suspended with the help of plastic threads and glass rod in a series of 6 beakers of capacity 200ml each containing 1 M Tartaric acid solution (100ml) in the presence and absence of AECCS. After completion of immersion time, the specimens were taken out, washed, dried, weighed accurately (m2) and thus subtracting m2 from m1 weight loss of steel specimens were determined. The employed concentration range of AECCS was of 0.5 – 10 % (v/v). The immersion time of steel specimen was 1 hour. The experiments were repeated at four different temperatures. 4.4 Determination of corrosion rates & inhibition efficiency 4.4 a.Corrosion rates: The value of corrosion rate (ρcorr.) was calculated from the following equation [7]: ρcorr. (g cm-2 sec-1) = m1 − m2 A⋅t (1) where m1 and m2 are the masses of the specimen in aggressive media before corrosion and after corrosion. A is the total area of the specimen and t is the corrosion time. © 2013 University of Manchester and the authors. This is a preprint2of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 4.4 b. Inhibition efficiency IE(%): With the help of calculated corrosion rates, the inhibition efficiency for steel corrosion in Tartaric acid in presence of various concentrations of AECCS and at different temperatures was obtained from the following equation [8] : IE% = ( ρ o corr . − ρ corr . ρ 0 corr . ) x 100 (2) where ρ0corr. & ρcorr. are the corrosion rates of steel in absence and presence of certain concentration of AECCS respectively. 4.5 Determination of kinetic and thermodynamic parameters 4.5 a. Kinetic parameters: Kinetic parameters k (rate constant) and B (reaction constant) were calculated with the help of straight lines obtained in graph plotted between log values of inhibitor concentration and log values of corrosion rates at different temperatures.The equation used for determining kinetic parameters is [9,10]: log ρcorr. = log k + B log Cinh. (3) where k is the rate constant and equal to ρcorr. at inhibitor concentration of unity, B is the reaction constant which is a measure for the inhibitor effectiveness and Cinh. is the concentration in % (v/v ml/100ml) of the inhibitor. 4.5 b. Thermodynamic parameters: Energy of activation (Ea) Energy of activation (Ea) was calculated from the slopes of plots of log ρ versus 1/T and also calculated from following Arrhenius equation [11] : log ρ2 ρ1 = 1 1  Ea  −  2.303 R  T1 T2  (4) where ρ1 and ρ2 are the corrosion rates at temperatures T1 and T2 respectively. © 2013 University of Manchester and the authors. This is a preprint3of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 Heat of adsorption (Qads.) The values of heat of adsorption Qads. were calculated using the following equation [12] : Qads = 2.303 R log where  θ 2   θ1  T1 xT2  −    1 − θ 1 − θ  2   2  T2 − T1  (5) θ 1 & θ 2 are degrees of surface coverage at temperature T1 & T2 . The enthalpy of adsorption (∆ ∆Hads.) The enthalpy of adsorption (∆Hads. ) was calculated from the following equation [13] : ∆Hads. = Ea – RT (6) The positive sign of enthalpies reflect the endothermic nature of the steel dissolution process [5]. The ∆Hads values indicate that the adsorption of inhibitor on metal surface is chemisorption. Physical adsorption occurs in the first stage, then inhibitors are chemisorbed on the metal surface by sharing of an electron pair of heteroatoms present in plant extract with orbital of iron forming covalent bond, leading to the positive value of ∆Hads [14]. 5. Results and discussion 5.1 Corrosion rates & inhibition efficiency: Table.1: Represents the corrosion rates of steel specimen in 1 M Tartaric acid solution in absence and presence of different concentrations of AECCS at different temperatures. A remarkable decrease in steel corrosion rate was observed with the addition of increasing amount of AECCS. It is clear from Table 1. that corrosion rate of steel in 1 M Tartaric acid in absence and presence of AECCS obeys the Arrhenius type reactions as it increases with rising solution temperature. Fig.1 represents the curves of log ρcorr. versus log Cinh. at various studied temperature. The straight lines are obtained and the Kinetic parameters (k and B) are calculated by eq. (3) and listed in Table.2. © 2013 University of Manchester and the authors. This is a preprint4of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 Table 1. Steel corrosion rates in 1 M Tartaric acid in absence and presence of different concentrations of AECCS at different temperatures ρcorr. x10-8(g cm-2 sec-1) Cinh.in % (v/v) 300C 400 C 500 C 600 C 0.0 14.3 24.8 47.5 80.7 0.5 7.2 13.0 21.5 32.5 1.0 6.7 10.5 17.7 28.5 2.0 6.5 9.7 13.8 19.5 5.0 6.0 8.0 10.0 16.2 10.0 5.2 6.5 8.8 13.2 Table 2. Kinetic parameters for the corrosion of steel in 1 M Tartaric acid containing AECCS at different temperatures Temperature (0C) Kinetic Parameters B k x10-8 (g cm-2 sec-1) 300 -0.1101 0.6934 0 -0.2083 0.4571 0 -0.3035 0.3162 0 -0.2963 0.3467 40 50 60 © 2013 University of Manchester and the authors. This is a preprint5of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 5.2 Effect of temperature on inhibition efficiency IE (%) Table 3. illustrates the variation of IE (%) with AECCS concentration at different temperatures in 1 M Tartaric acid. The obtained data in Table 3. reveal that the inhibition efficiency increases with an increase in the inhibitor concentration. This suggests that the inhibitor species are adsorbed on the steel/ solution interface where the adsorbed species mechanically screen the coated part of the metal surface from the action of the corrosive medium. It can be seen that the IE (%) reaches 63.64% at 303K. Fig.2. shows the relationship between inhibition efficiency (IE%) and logarithm of concentration (log Cinh.) of Carum copticum seeds extracts in 1 M Tartaric acid at different temperatures. All plots have the form of S- shaped adsorption isotherm. © 2013 University of Manchester and the authors. This is a preprint6of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 Table 3. Inhibition efficiencies of AECCS at different concentrations & temperatures in 1 M Tartaric acid Cinh.in % IE (%) (v/v) 0 30 C 0 40 C 500C 600 C 0.5 49.65 47.58 54.74 59.72 1.0 53.15 57.66 62.74 64.68 2.0 54.54 60.88 70.94 76.84 5.0 58.04 67.74 78.94 79.92 10.0 63.64 73.79 81.47 83.64 5.3 Adsorption isotherms Adsorption plays an important role in the inhibition of metallic corrosion by inhibitors. The adsorption of AECCS followed the Freundlich adsorption isotherm using the following equation [15]. © 2013 University of Manchester and the authors. This is a preprint7of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 Θ = k Cn submitted 6 November 2013 (7) log Θ = log k + n log C (8) where 0 < n < 1, Θ is the degree of surface coverage and is equal to IE%/100, C is the Carum copticum seeds extract concentration and k is the equilibrium constant. The logarithm of degree of surface coverage is plotted against logarithm of inhibitor concentration and straight lines are obtained as a result (Fig.3). 5.4 Thermodynamic consideration 5.4 a. Energy of activation (Ea) Table 4. shows the calculated values of activation energy (Ea) for steel corrosion in 1 M Tartaric acid with and without inhibitor from 303 K to 333 K. Energy of activation (Ea) was calculated from the slopes of plots of log ρ versus 1/T in Fig © 2013 University of Manchester and the authors. This is a preprint8of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 4. and also calculated from Arrhenius equation (4).The Ea values were found to be 47.94 KJ/mol without AECCS and 25.72 KJ/mol at 10% (v/v) conc. of AECCS. The Ea values calculated from the slopes of Arrhenius plot and by using eq (4) are approximately almost similar. Table 4. Thermodynamic parameters for steel corrosion in 1 M Tartaric acid with AECCS Conc. of aqueous Ea (from Ea (from Qads. ∆Hads. extract of Carum Arrhenius plot) KJ/mol KJ/mol KJ/mol copticum seeds (v/v) % eqn.) KJ/mol 0.0 47.94 47.87 - 45.18 0.5 41.75 42.13 -19.57 38.99 1.0 40.10 39.44 -10.09 37.34 2.0 30.44 29.87 18.49 27.68 5.0 27.53 27.38 26.68 24.77 10.0 25.72 25.46 33.91 22.66 © 2013 University of Manchester and the authors. This is a preprint9of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 5.4 b. Heat of adsorption (Qads.) Table 4. shows the calculated values of heat of adsorption (Qads.) for steel corrosion in 1 M Tartaric acid at various concentrations of inhibitor. The values of heat of adsorption Qads. were calculated using equation (5). From Table (4). it is clear that the Qads values are ranging from -19.57 KJ/mol to 33.91 KJ/mol. The value of Qads. increases with the increase in concentration of inhibitor. 5.4 c. The enthalpy of adsorption (∆ ∆Hads.) Table 4. shows the calculated values of enthalpy of adsorption (∆Hads.) for steel corrosion in 1 M Tartaric acid at various concentrations of inhibitor. The enthalpy of adsorption (∆Hads.) is calculated using equation (6). From Table (4) it is clear that the ∆Hads is 45.18 KJ/mol in absence of inhibitor and 22.66 KJ/mol at 10% (v/v) concentration of inhibitor at 333 K. The positive sign of enthalpies reflect the endothermic nature of the steel dissolution process [5]. The ∆Hads values indicate that the adsorption of AECCS on steel surface is chemisorption. Physical adsorption occurs in the first stage, then inhibitors are chemisorbed on the steel surface by sharing of an electron pair of heteroatoms present in plant extract with orbital of iron forming covalent bond, leading to the positive value of ∆Hads [14]. 6 Conclusion The Aqueous extract of Carum copticum seeds was found to be a good inhibitor for steel in 1 M Tartaric acid solution with inhibition efficiency reaching upto 63.64% at room temperature. The rate of corrosion of steel in 1M Tartaric acid is observed as a function of the concentration of AECCS under experimental conditions. This rate is decreased as the concentration of AECCS is increased. The inhibition efficiency decreases with increase in temperature. The Aqueous extract of Carum copticum seeds is observed as a good, green, eco-friendly and cheaper corrosion inhibitor for steel in 1 M Tartaric acid solution. 7 Acknowledgement The authors are thankful to the Head of Chemistry Department and Principal, Government College, Kota for providing necessary laboratory facilities. 8 Bibliography 1.‘Inhibitory action of Borassus flabellifer Linn. shell extract on corrosion of mild steel in acidic media’, P.R. Vijayalakshmi , R. Rajalakshmi, S. Subhashini, E-Journal of Chemistry, 7, pp 1055-1065, 2010. 2.‘Limonene as green inhibitor for steel corrosion in hydrochloric acid solutions’, E. Chaieb, A. Bouyanzer, B. Hammouti , M. Berrabah , Acta Physico-Chimica Sinica, 25, pp 1254-1258, 2009. 3. ‘Peptidic compound as corrosion inhibitor for brass in nitric acid solution’,Y. Abed , M. Kissi, B. Hammouti , M. Taleb, S. Kertite, Progress in Organic Coatings, 50, pp 144-147, 2004. 4. ‘Schiff Bases as inhibitors of mild steel corrosion in sulphuric acid media’, M. Hosseini, S. F. L. Mertens, M. Ghorbani, M. R. Arshadi, Materials Chemistry and Physics, 78, pp 800-808, 2003. 10of a paper that has been submitted for publication in the Journal of © 2013 University of Manchester and the authors. This is a preprint Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 64 submitted 6 November 2013 5.‘Understanding the adsorption of 4H –1,2,4-triazole derivatives on mild steel surface in molar hydrochloric acid’, S. Nagalakshmi, N. B. Shankarya, J. P. Naik, L. J. M. Rao, Journal of Food Science & Technology, 37, pp 277-281, 2000. 6.‘Basic corrosion technology for Scientists and Engineers’, E . Mattsson, Ellis Horwood, Publishers, Chichester, West Sussex England, UK, Halted Press, New York, NY, USA 1989. 7.‘Temperature effects on the corrosion inhibition of mild steel in acidic solutions by aqueous extract of Fenugreek leaves’, E. A. Noor, International Journal of Electrochemical Science, 2, pp 996-1017, 2007. 8.‘Thiadaizole-A potential class of heterocyclic inhibitors for prevention of mild steel corrosion in hydrochloric acid solution’, M. A. Quraishi, M. A. W. Khan, Indian Journal of Chemical Technology, 12, pp 576-581, 2005. 9.‘Effect of Thiosemicarbazones on corrosion of steel in phosphoric acid produced by wet process’, E. Khamis, M. A. Ameer, N. M. AlAndis, G. Al-Senani, Corrosion, 56, pp 127-138, 2000. 10.‘The inhibition of mild steel corrosion in phosphoric acid solutions by some N-heterocyclic compounds in the salt form’, E. A. Noor, Corrosion Science, 47, pp 33-55, 2005. 11. Putilova I. N., Balezin S. A., Barannik V. P., Metallic Corrosion Inhibitors, Pregamon Press, New York 31, 1960 12.‘Influence of halide ions on the inhibitive effect of Congo red dye on the corrosion of mild steel in sulphuric acid solution’, E. E. Oguzie , Materials Chemistry and Physics, 87, pp 212-217, 2004. 13.‘Corrosion behaviour of mild steel in phosphoric acid medium with benzotriazole’, V. Chandrasekharan, K. Kannan, M. Natesan , Journal of Metallurgy and Materials Science, 46, pp 253-262, 2004. 14. ‘Flavonoids from Acalypha indica’, A. Nahrstedt, M. Hungeling, F. Petereit, Filoterapia, 77, pp 484-486, 2006. 15.‘Aqueous extract of Rosmarinus-officinalis L. as inhibitor of Al-Mg alloy corrosion in chloride solution’, M. Kliskic, J. Radosevic, S. Gudic, S. Katalinic, Journal of Applied Electrochemistry, 30, pp 823-830, 2000. 11of a paper that has been submitted for publication in the Journal of © 2013 University of Manchester and the authors. This is a preprint Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work.