Volume 16 Preprint 13


Ethane-2- thioamido-4-amino-N-(5-methylisoxazol-3-yl)-benzene sulfonamide: A novel inhibitor for the corrosion of mild steel in 1N HCl

S.Karthikeyan ,N.Arivazhagan, S.Narayanan

Keywords: Corrosion, quantum, inhibition, impedance

Abstract:
The corrosion of inhibition of mild steel has been monitored by Ethane-2- thioamido-4-amino-N-(5-methylisoxazol-3-yl)-benzene sulfonamide (ETAMBS) as an inhibitor in 1NHCl medium. The potentiodynamic polarization studies demonstrated the mixed mode of inhibitive action of the compound. The parameters like charge transfer resistance, double layer capacitance, surface uniformity and relaxation time derived from impedance analysis confirmed the effective performance of the inhibitor. The mode of adsorption of ETAMBS on mild steel surface was well demonstrated from quantum mechanical functions such as HOMO, LUMO, Hardness, softness, energy gap and dipole moment. The formation of protective film of the compound was proved by SEM images.

Because you are not logged-in to the journal, it is now our policy to display a 'text-only' version of the preprint. This version is obtained by extracting the text from the PDF or HTML file, and it is not guaranteed that the text will be a true image of the text of the paper. The text-only version is intended to act as a reference for search engines when they index the site, and it is not designed to be read by humans!

If you wish to view the human-readable version of the preprint, then please Register (if you have not already done so) and Login. Registration is completely free.

ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 EthaneEthane-2- thioamidothioamido-4-aminoamino-N-(5(5-methylisoxazolmethylisoxazol-3-yl)yl)-benzene sulfonamide: sulfonamide: A novel inhibitor for the corrosion of mild steel in 1N HCl S.Karthikeyan*1 ,N.Arivazhagan2, S.Narayanan2 1* Surface Engineering Research lab, Centre for Nanobiotechnology, VIT University, Vellore-632014, India. 2 School of Mechanical &Building Sciences, VIT University, Vellore-632014, India (*1 Corresponding author: skarthikeyanphd@yahoo.co.in) Abstract The corrosion of inhibition of mild steel has been monitored by Ethane-2thioamido-4-amino-N-(5-methylisoxazol-3-yl)-benzene sulfonamide (ETAMBS) as an inhibitor in 1NHCl medium. The potentiodynamic polarization studies demonstrated the mixed mode of inhibitive action of the compound. The parameters like charge transfer resistance, double layer capacitance, surface uniformity and relaxation time derived from impedance analysis confirmed the effective performance of the inhibitor. The mode of adsorption of ETAMBS on mild steel surface was well demonstrated from quantum mechanical functions such as HOMO, LUMO, Hardness, softness, energy gap and dipole moment. The formation of protective film of the compound was proved by SEM images. Keywords Corrosion, quantum, inhibition, impedance Introduction In industries, the corrosion of mild steel is an inevitable reaction in acidic media. Several thiourea derivatives have been reported as effective corrosion inhibitors for 1 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 mild steel [1-5] . In recent years, the retardation of metal dissolution has been studied by using macro heterocyclic compounds or drug molecules. Eno etal [6] and Shukla [7] have studied the inhibitive actions of sparflaxin and cefalexin on the corrosion of steel in acidic media. Harikumar and his co investigators [8-9] have reported the performances of cloxacillin and ampicillin drugs as corrosion inhibitors of mild steel in 1N HCl. The careful study on literature confirms that no valid publication is existing for the use of Ethane-2- thioamido-4-amino-N-(5-methylisoxazol-3-yl)-benzene sulfonamide (ETAMBS) as an inhibitor for the corrosion mild steel in 1NHCl medium. Experimental procedure The mild steel specimens (98.7 % purity) of size 10mm2 x 40 mm2 were mechanically polished degreased with trichloro ethylene and then immersed in 1N HCl medium in the presence and absence of ETAMBS for weight loss and gasometric studies. The above specimens of size 10 mm2 were employed as working electrodes, a platinum foil with surface area of 30 mm2 and Hg/Hg2Cl2/HCl(1N) were used as counter and reference electrodes for potentiodynamic polarization and A.C impedance measurements using EG&G Princeton Applied research model-7310. Gaussian software was employed to calculate the quantum chemical parameters like HOMO, LUMO, Hardness, softness, energy gap ,electro negativity and dipole moment of the compound. Results and discussion: discussion Weight loss and gasometric studies: The results of weight loss and gasometric studies are given in table 1. It was observed that the dissolution of metal is minimized when the concentration of ETAMBS is increased. The maximum corrosion inhibition was noticed at the concentration of 10 ppm of inhibitor. The remarkable performance of inhibition is due to the adsorption of the compound on steel surface. 2 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Potentiodynamic polarization measurements: measurements: The polarization studies indicated that in the presence of ETAMBS the Ecorr and I corr values have decreased as compared with blank (table 2). The anodic and cathodic Tafel slopes have been shifted to less negative directions equally. This confirms that the compounds behaved as mixed mode of inhibitor as it reduces the oxidation of Fe atom and evolution of hydrogen gas on the same extent (Figure 1). These results are in good conformity with weight loss and gasometric studies. Impedance studies: studies: The nyquist graphs for the corrosion of mild steel in the presence and absence of different concentration of ETAMBS are given in table 3.From figure 2, it is cleared that perfect semicircles are obtained for the corrosion inhibition reaction indicating that the reaction follows charge transfer mode. The charge transfer resistance is found as high and it reaches maximum value at 10 ppm of ETAMBS ,where as double layer capacitance values is lessened with increased concentrations of inhibitor [10]. The factors like surface inhomogeneity or uniformity (n) and relaxation time (τ) played vital role for justification of performance of inhibitor. It has been proved that higher the surface uniformity, higher will be the inhibition and lesser will be the relaxation time for inhibitor. The surface uniformity and relaxation time can be related as follows: Z = 1/ Cdl [(-1/τ) n]-1 It can be assumed that for 100% inhibition efficiency, the surface uniformity may be unity. The increased values of surface inhomogeneity (n) and reduced relaxation time values confirmed the role of inhibition of the compound. 3 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Quantum mechanical calculations: The quantum mechanical factors like energy of highly occupied molecular orbitals (HOMO),Lowest un occupied molecular orbitals, energy gap(∆E), Hardness (η),softness (σ) , dipole moment (•), electron affinity (A) and electronegativity (χ ) calculated from optimized structure of ETAMBS (figure 3.a) are given in table 4. These values indicate that ETAMBS inhibit the corrosion of mild steel in 1N HCl. It has been well established fact that if ∆E values are > 8 and • > 4 , then the inhibition efficiency of the compound will be above 90% [10]. The distribution of orbital’s is higher in LUMO (Figure 3.c) than HOMO (Figure3.b) indicating that the interaction between the inhibitor and un occupied d- orbitlas of iron atom. The Mullikan’s charges for C(1), S(3), C(6), C(8), C(9), C(10), C(11), O(13), O(14), N(15), N(18) and C(19) confirmed that adsorption of the compound on mild steel surface may take place through the above negatively charged atoms. Besides the above factors, other groups like sulphoxide, π - electrons in the five membered ring, -C=S group have significantly enhanced the adsorption on metal surface. SEM Analysis The SEM photos for the corrosion of mild steel in 1N HCl is given in figure 4.a.The image evidently shows the formation of etched iron surface in acid medium. The formation of protective layer of the inhibitor on mild steel is clearly visible in Figure 4.b . Conclusions: 1.The performance of a novel corrosion inhibitor Viz., Ethane-2- thioamido-4amino-N-(5-methylisoxazol-3-yl)-benzene sulfonamide (ETAMBS) has been thoroughly screened by weight loss, gasometry and impedance measurements. 2. Potentiodynamic polarization results confirmed that the compound behaved as mixed type inhibitor. 4 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 3. The adsorption of the inhibitor on steel surface is further justified from quantum mechanical factors and SEM images. References: 1. Inhibition of Steel Corrosion by Thiourea Derivatives, Singh I, Corrosion , 49, pp473, 1993 2. Inhibition of sulfuric acid corrosionof 410 stainless steel by thioureas, R. Agrawal and T.K.G.Namboodhri , Corr. Sci, 30, pp37, 1990. 3. The inhibitive action of isopropyl thiourea on the corrosion and hydrogen permeation through mild steel in acidic solutions, S. Karthikeyan, S. Harikumar, G. Venkatachalam and S. Narayanan, Int. J. Chem. Tech research, 4(4) ,pp 910-917, 2012. 4. Thiourea derivatives as corrosion inhibitors for mild steel in formic acid, M.A Quraishi ,F.A Ansari and D.Jamal ,Materials Chemistry and Physics, 30, pp 687, 2003. 5. Influence of some thiazole derivatives on the corrosion of mild steel in hydrochloric acid , M.A.Quraishi , M.A.W. Khan and M. Ajmal , Anti-Corros. Methods Mater, 43, 43 PP 5, 1996. 6. Inhibition of the corrosion of mild steel in HCl by sparfloxacin N. O. Eddy, S. A. Odoemelam and A. J. Mbaba, African Journal of Pure and 5 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Applied Chemistry , 2 (12) , pp. 132-138, 2008. 7. Cefalexin drug: A new and efficient corrosion inhibitor for mild steel in hydrochloric acid solution, Sudhish Kumar Shukla, M.A. Quraishi, Materials Chemistry and Physics 120 , pp142–147,2010 8. Inhibition of mild steel corrosion in hydrochloric acid solution by cloxacillin drug, S.Harikumar and S.Karthikeyan, J. Mater. Environ. Sci. 3 (5) ,PP 925934,2012. 9. Inhibition Effect of Amoxicillin drug on the Corrosion of Mild Steel in 1N Hydrochloric acid Solution, S. Hari Kumar, S. Karthikeyan, S.Narayanan and K.N.Srinivasan, International Journal of ChemTech Research, 4(3), pp 10771084, 2012. 10. Quantum Mechanical Studies Of Thio Compounds On The Corrosion Inhibition Of Mild Steel In Acidic Media, P.A.Jeeva, S.Harikumar, .Karthikeyan, S.Narayanan, A.Mukherjee , N.Chandrasekaran, International Journal of PharmTech Research, Vol.4(4), pp 1422-1427, 2012. 6 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Table 1. Values of inhibition efficiency obtained from weight loss and gasometric measurements with and without the presence of ETAMBS. Concentration of Inhibitor Inhibitor (in ppm) Inhibition efficiency (%) in 1N HCl Weight loss studies Gasometric studies 2 82 81.6 6 94 94.2 10 98.2 97.9 Table 2 .Results of polarization measurements of mild steel in 1N HCl in the presence and absence of various concentrations of of ETAMBS. Concentration Ecorr (mV) Tafel slopes (m.V/ dec) Icorr Inhibition of Inhibitor efficiency (mM) (%) ba Blank bc m.A /cm2 -520 65 120 2.64 --- 2 -433 64 138 0.52 80.3 6 -347 78 141 0.17 93.6 7 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 10 Volume 16, Preprint 13 -285 85 140 submitted 28 February 2013 0.05 98.1 Table 3.Nyquist parameters for the corrosion of mild steel in 1N HCl in the presence and absence of different concentrations of ETAMBS. Concentration of Inhibitor (mM) 1N HCl Charge Double layer Surface Relaxation time Transfer capacitance uniformity (τ) in seconds resistance (Cdl) •F/cm2 (n) (Rt) Ohm.cm2 Blank 25 245 0.0708. 1 47 139 0.83 0.00121 10 61 125 0.94 0.00011 50 77.8 114 0.98 0.00103 8 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Table 4. Mullikan’s charges calculated from quantum mechanical studies C C -0.178 C(1) 0.265 C(2) S(3) S -0.245 N N(4) 0.107 C -0.162 C(6) C(7) C 0.150 C -0.152 C(8) 9 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 C(9) C -0.035 C(10) C -0.204 C(11) C -0.027 S(12) S 2.533 O -1.132 O(13) O -1.143 O(14) N -0.174 N(15) H 0.104 C 0.202 N -0.268 C -0.170 C 0.062 H(16) C(17) N(18) C(19) C(20) 10 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 O 0.029 O(21) H 0.056 H(22) H 0.040 H(23) H 0.067 H(24) H 0.099 H(25) H 0.026 H(26) H 0.026 H(27) H 0.037 H(28) H 0.023 H(29) H 0.028 H(30) submitted 28 February 2013 Table 5: Quantum mechanical studies of corrosion of mild steel in 1N HCl EHOMO(eV) ELUMO(eV) •(Debye) η χ σ (eV) Compound ETAMBS ∆E -9.7142 -1.70437 8.0098 4.5 4.004 5.7092 0.2497 11 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Figure 1: Tafel curves for the corrosion inhibition of mild steel in 1N HCl. Figure 2. Nyquist plots for the corrosion inhibition of mild steel 12 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Figure 3 a.Optimized structure of ETAMS Figure 3.b. Highly occupied molecular orbital view of ETAMBS 13 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work. ISSN 1466-8858 Volume 16, Preprint 13 submitted 28 February 2013 Figure 3.c. Lowest un- occupied molecular orbital view of ETAMBS Figure 4.a. SEM images for the etched iron surfaces in 1N HCl Figure 4.b. SEM images for the corrosion mild steel with ETAMBS . 14 © 2013 University of Manchester and the authors. This is a preprint of a paper that has been submitted for publication in the Journal of Corrosion Science and Engineering. It will be reviewed and, subject to the reviewers’ comments, be published online at http://www.jcse.org in due course. Until such time as it has been fully published it should not normally be referenced in published work.