zhewei ye, yao zhao, wenbo cai and yuanlin pang
Schlüsselwörter: Gas drilling, Erosion failure, Computer simulation, Liquid-solid two-phase flow
Zusammenfassung:
<p>In order to study the erosion failure mechanism of gas drilling wellhead four-way body, a wellhead four-way erosion model was established based on the liquid-solid two-phase flow model and erosion theory. Fluent software was used to study the velocity, particle mass flow, particle density, and particles of different fluid media Effect of particle size on erosion rate. The results show that the areas of maximum erosion rate are basically the same under different experimental conditions, and all occur at the junction of the wellhead four-way body near the edge of the outlet; the maximum erosion rate gradually increases with the increase of inlet velocity and particle mass flow, and the velocity increases The higher the mass flow rate, the greater the impact on the maximum erosion rate. Under the experimental data in this paper, the maximum erosion rate does not change significantly with the increase in particle density. The relationship between the maximum erosion rate and the particle size is more complicated. There may be an interaction between the particle size, particle mass flow rate, and inlet flow rate.<br></p>
Da Sie nicht beim Journal angemeldet sind, ist es nun unsere Richtlinie, eine 'Nur-Text'-Version des/der preprint anzuzeigen. Diese Version wird durch Extraktion des Textes aus der PDF- oder HTML-Datei erstellt, und es ist nicht garantiert, dass der Text ein originalgetreues Abbild des Textes des Artikels ist. Die Nur-Text-Version soll als Referenz für Suchmaschinen bei der Indexierung der Website dienen und ist nicht dafür gedacht, von Menschen gelesen zu werden!
Wenn Sie die für Menschen lesbare Version des/der preprint ansehen möchten, registrieren Sie sich bitte (falls noch nicht geschehen) und melden Sie sich an. Die Registrierung ist völlig kostenlos.